Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. DUGDUG started following Strange access violation error with TexGen, no luck troubleshooting.
  3. DUGDUG
    I successfully generated lod with SSGEN, now I try to use Textgen and it runs for about 30 seconds and then gives this error: Access violation at address 0000000000B9D50D in module 'TextGen64.exe'. Read of address 0000000000000000 I have looked through all the forums with this error and nothing has solved it. I have been using this program for 4 years and never experienced an issue like this. I am using the most up to date version of DynDOLOD and it's resources, and I am running the program through MO2. Any advice would be appreciated, I don't even know where to start with this.
  4. sheson
    There shouldn't be a problem loading the entire load into xEdit x64 version.
  5. DUGDUG
    DUGDUG joined the community
  6. Today
  7. z929669
    No worries BD. We'll miss you and hope for a speedy return to normalcy in your world
  8. z929669
    Go for it. I will add it next update. I commented on Nexus Posts RE Vortex. Vortex seems to have overly strict FOMOD XML requirements that expect n/a tags. Really dumb that we must do this to make that application happy for evidently no reason at all :/
  9. Yesterday
  10. Oliphantaupe
    Oliphantaupe joined the community
  11. Vonklinkenhoffn
    It's very much deserved. Can I just ask one more thing, and I'm able to fly on my own; I'm going to do the whole renumber/header version thing on all the mods that needs it. I was thinking I'd just load up the entire mod list into xEdit, and just go ahead and do it, so that I can be sure to catch any and all patches etc. There isn't any problems loading the whole modlist when doing the renumbering/version thing, like I'm thinking of, is there?
  12. Adamusrakun
    Adamusrakun joined the community
  13. DoubleYou
    Appears the FOMOD needs a fix from the comments. Also, the Blender Pynifly plugin was recently updated to correctly do vertex colors. I may want to take a stab at repairing the main mods leaf animations to be less wonky.
  14. ButchDiavolo
    Due to rather overwhelming issues in the "real world", I will be unable to give support in the STEP forums for the time being. I know this message is not necessary, but I just want to let people know what is going on and why I am not responding to messages and IMs. I will be back when things have settled down again. And yes, that is a threat
  15. sheson
    That is really appreciated. Thank you very much.
  16. Vonklinkenhoffn
    I'll do the same renumbering procedure for the other two mods that also had this issue, and I'll have some time tomorrow to test it out thoroughly. I'm so happy to hear the other warnings are of no concern! Thank you so much again for helping me! I bought you a couple of coffees for your trouble https://Ko-fi.com/home/coffeeshop?txid=9c5cd199-12d8-4a0e-b5aa-79ef3967e609&mode=public&img=ogiboughtsomeone
  17. trance8880
    trance8880 joined the community
  18. sheson
    It looks like renumbering worked OK. I would check one or two key changes of the mod to see if it works as expected in the game. The warnings in Fallout.esm are expected and no need for concern.
  19. z929669
    Mod updated: Changelog Version 2.36.2 Updated LOD models for treeaspen04, treeaspen05, and treeaspen06, since the corresponding full models were changed in AA 2.36 Updated FOMOD
  20. Last week
  21. z929669
    "They are gone" ... xEdit executables or your mods? Either way, follow Step 1 and Step 2 of the Step SSE guide. Make sure to click/open all spoilers for detailed instructions. Carefully read the SSG and "Tools Setup".
  22. Vonklinkenhoffn
    Holy smokes it worked! You are a genious, thank you so much for helping me! I've really learned so much from this. Now I know what I did wrong, and I also know how to do it right for other mods as well, this is awesome. I did what you said, and the results from renumbering the "Fallout 4 AI Overhaul" mod looked very different. I have saved the messages logs from both the renumber/version change I did in FO4Edit, and the check I did after in FO4VREdit. I also Have the log from TexGen when I ran it to check everything. It did not give me any error messages this time, which is fantastic! I did however notice some warnings in the logs; "Warning: File contains duplicated top level group: GRUP Top "WEAP" I don't know if this is very serious or not, but I reckon it's not that serious since TexGen didn't bother to give a specific error message from it? Anyways, I have the logs here, if you would like to just glance over them to see that I really actually managed to fix it? FO4Edit Log: https://paste.ee/p/tfFqI FO4VREdti Log: https://paste.ee/p/HDOwN TexGen Log: https://paste.ee/p/TKZvG
  23. Darklustre
    Not sure if this is the right place to post this but please move it where you want it. I've downloaded SEEdit 4.0 to my Modding Tools directory. I open it and can click on the Quick Clean exe and start the program. Of course, I can't clean any mods until I config with MO2. I start doing that and when I navigate to the directory with the exe, they are gone. I'm not sure what to do?
  24. Darklustre
    FYI for anyone having the same problem. Apparently WICO has this bizarre feature of randomly setting NPCs essential. There are patches that fix this. I had to try a combination of different mods and patches to finally find one that worked and let me keep my character without deforming her.
  25. maxxpower
    Thanks for the response. I'm honestly quite illiterate when it comes to this so I'll read through your message a few times over to digest it and will come back with useful logs.
  26. sheson
    DynDOLOD 2.x had no updates since years. DynDOLOD 3 is released for alpha testing so people can help with finding and reporting problems. Since you did mention a problem, read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts. Also upload the papyrus logs and the c:\Users\[USERNAME]\Documents\My Games\Skyrim Special Edition\SKSE\DynDOLOD.log See https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds#Testing Do not paraphrase messages. Provide the actual message. It is unclear if "1.5.97 Steam dll" refers to DynDOLOD DLL SE or the DynDOLOD DLL NG version that works for 1.5.97 and not 1.6.1130+ Which DLL is needed, depends on which papyrus scripts are installed last. However, DynDOLOD DLL SE and DynDOLOD DLL NG are not interchangeable, like DynDOLOD DLL SE and PapyrusUtil are. DynDOLOD DLL NG requires a LOD specifically generated for it. See https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds
  27. maxxpower
    Hi all. I've got a question. Is DynDOLOD 3.00 recommended over the old one? (I'm using 1.5.97) I was able to successfully generate TexGen and DynDOLOD Outputs using the NG dll but when I started the game it said that I was missing the dll so I had to replace the NG dll with the old 1.5.97 Steam dll. I'm just confused on how that happened.
  28. maxxpower
    maxxpower joined the community
  29. sheson
    Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts. Obviously posts the crash log when making posts about CTDs in the game. https://dyndolod.info/Official-DynDOLOD-Support-Forum Report the actual problem or error message without making assumptions or asking leading questions. Read the explanations and tips below, especially about what information and logs to provide and how. Also see Don't ask to ask, just ask and How do I ask a good question? https://dyndolod.info/Official-DynDOLOD-Support-Forum#Rudimentary-Troubleshooting In case of issues in the game, test if the problem persists without any DynDOLOD output. I will obviously look at the logs regardless of the reason of the CTD and not just make up illogical nonsense just because a filename of a plugin is listed in the load order or suggest to use the Skyrim LE SKSE memory patch with Skyrim SE. How saves, scripts and script instances work is known and documented since decades.
  30. Soulmancer
    Hi, Not sure if this is actually dyndolod related or a false lead. I recently moved from Net Script Framework to Crash Logger as I updated to 1.6.1170 ... I've been getting occasional crashes on loading a saved game and moving between loading areas and am noticing this is a common theme in every log. DynDOLOD.esm: count: (1) There is a chance that this might cause a CTD when changing locations. I do see in your FAQ that this will have nothing to do with auto save, but do you think it has enough validity to post a crash log and dyndolod log now or should I follow the steps outlines in your read me? It's a bit hard to duplicate as the crashes seem at random and not consistent, just sometimes loading a save game or sometimes passing through a loading screen. I can't really "make it CTD" on the fly.
  31. Ranu
    Awesome, thanks for the quick reply @sheson Btw I'm am on 1.6.640, not sure if that makes a difference. I'll verify the game integrity and downgrade again and see if it fixed the issue
  32. sheson
    The Skyrim.esm file is probably corrupt. Its CRC32 does not seem to match the current hat ships with 1.6.1170 Load it with a recent version of xEdit and check for similar error messages by the background loader. Verify the game files in Steam to acquire the current version(s) of game the plugins.
  33. Ranu
    Thanks @sheson for pointing that out. Here are my logs, thanks for your support! https://ufile.io/f/kp9jw Please let me know if you need anything else
  34. sheson
    Moved to the DynDOLOD 3 Alpha thread. Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts. See https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds#Testing, also which papyrus and DynDOLOD.log to upload when having problems with DynDOLOD DLL NG. Obviously post the crash log when reporting crashes in the game. See https://dyndolod.info/FAQ#ILS-or-CTD Dyndolod Problem with worlds config file probably means the file does not exist, which might mean the DynDOLOD patch was not generated for DynDOLOD DLL NG. DynDOLOD DLL NG is not a drop-in replacement. See https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds
  35. sheson
    Yes, make sure to also load all plugins that have the one you are chaning as master. Once you finalized the load order, make sure to check the entire load order for error with xEdit. In case a plugin was forgotten, it will have unresolved form IDs errors. DynDOLOD also catches thoses errors, but it doesn not check all records, like the xEdit check does.
  1. Load more activity
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines, Privacy Policy, and Terms of Use.

  I accept