Jump to content


Photo

DynDOLOD 2.54 Skyrim SE/VR BETA

dyndolod lod skyrim se skyrim vr

  • Please log in to reply
1139 replies to this topic

#1111 nanashi

nanashi

    Prisoner

  • Members
  • 16 posts

Posted 03 January 2019 - 08:15 PM

bEnableStippleFade=0 in [Display] in Skyrim.ini should do it. Pretty sure its Skyrim.ini instead of Prefs but maybe try both.

Thanks, but it looks like turning it off is worse. It doesn't behave like LE. Instead the billboard pops out (disappears) before the 3D mesh pops in. There's a pretty noticeable gap where there's nothing there.


  • 0

#1112 Martimius

Martimius

    Prisoner

  • Members
  • 31 posts

Posted 04 January 2019 - 12:25 AM

Yes

Do you have any plans on looking into the patch? Also should I just run my DynDOLOD without patching Lanterns of Skyrim for now?


  • 0

#1113 sheson

sheson

    Dragon King

  • Mod Authors
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 3,785 posts

Posted 04 January 2019 - 04:08 AM

Do you have any plans on looking into the patch? Also should I just run my DynDOLOD without patching Lanterns of Skyrim for now?

The DynDOLOD Patches are for Skyrim and are working fine AFAIK. You may want to make sure you have latest version of the DynDOLOD Patches. They might work for Skyrim SE as well, but I do not support that at the moment.


  • 0

#1114 Tacocat

Tacocat

    Prisoner

  • Members
  • 39 posts

Posted 05 January 2019 - 05:42 PM

Is there a changelog for the new 2.54 resource files, or did you just match the version numbers?


  • 0

#1115 sheson

sheson

    Dragon King

  • Mod Authors
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 3,785 posts

Posted 06 January 2019 - 03:00 AM

Is there a changelog for the new 2.54 resource files, or did you just match the version numbers?

Just unfold Changelog DynDOLOD 2.54 on first post.


  • 0

#1116 Tacocat

Tacocat

    Prisoner

  • Members
  • 39 posts

Posted 06 January 2019 - 06:55 AM

Just unfold Changelog DynDOLOD 2.54 on first post.

Oops, didnt see that. Thanks :D


  • 0

#1117 SirenBrink

SirenBrink

    Prisoner

  • Members
  • 1 posts

Posted 11 January 2019 - 05:48 AM

Getting "Fatal: Could not open registry key: \SOFTWARE\Bethesda Softworks\Skyrim\"

 

I did try rerunning the Skyrim SE launcher via steam and launching the game after the recent update, but I have no idea what to do about this error message. What does it mean by "Verify game is starting in the desired game mode"? Does it think I'm running VR?

 

Nevermind, need to pass "-sse" argument so it looks for Special Edition instead of LE


Edited by SirenBrink, 11 January 2019 - 05:56 AM.

  • 0

#1118 nanashi

nanashi

    Prisoner

  • Members
  • 16 posts

Posted 11 January 2019 - 04:52 PM

Install a better matching billboard or create your own. The log will show the path and filename of the billboard texture.

 

The way LOD works and it transitions is hardcoded into the engine. AFAIK there are no INI settings that can change that.

I finally realized what it was. It was the Lightweight Grass Overhaul mod. I didn't realize it until I checked for mod updates and saw the changelog for it. Author had accidentally included his LODGEN files for the PineTrees which are the exact trees I had issues with.

 

I really miss that MO2 can't check for conflicts in BSA files. If this was MO1, I would have spotted this. But since MO2 doesn't look inside BSA files and I was using vanilla trees, I never realized this unintentional conflict by the LWGO author existed.


  • 0

#1119 zilav

zilav

    Thane

  • Mod Authors
  • PipPipPipPipPipPip
  • 362 posts

Posted 12 January 2019 - 01:54 AM

Press Ctrl+F3 in xEdit to open Assets Browser and look for a file, it will show in which containers (BSA and Data folder) this file is contained.


  • 0

#1120 sheson

sheson

    Dragon King

  • Mod Authors
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 3,785 posts

Posted 12 January 2019 - 04:51 AM

I finally realized what it was. It was the Lightweight Grass Overhaul mod. I didn't realize it until I checked for mod updates and saw the changelog for it. Author had accidentally included his LODGEN files for the PineTrees which are the exact trees I had issues with.

 

I really miss that MO2 can't check for conflicts in BSA files. If this was MO1, I would have spotted this. But since MO2 doesn't look inside BSA files and I was using vanilla trees, I never realized this unintentional conflict by the LWGO author existed.

Typically billboard downloads come as loose files. The LOD generated by DynDOLOD is loose files. Loose files win over files in BSA.

 

MO has a data tab that shows the winning loose files and from which mod they are. For everything else there is the well known xEdit Asset Browser Zilav already mentioned.


  • 0

#1121 reddvilzz

reddvilzz

    Jarl

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 870 posts

Posted 12 January 2019 - 02:38 PM

Hi sheson, Do you have any clue why with DynDOLOD enabled my racemenu paint section is all emptied? Removing DynDOLOD esp restore it back.

Also when I have it activated, I keep CTD every time I entered the load screen whenever I use the carriages to fast travel no matter where it is or where it goes the CTD always happened 3 around 3 secs after the load screen started.

Sent from my ONEPLUS A5010 using Tapatalk
  • 0

#1122 sheson

sheson

    Dragon King

  • Mod Authors
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 3,785 posts

Posted 12 January 2019 - 02:51 PM

Hi sheson, Do you have any clue why with DynDOLOD enabled my racemenu paint section is all emptied? Removing DynDOLOD esp restore it back.

Also when I have it activated, I keep CTD every time I entered the load screen whenever I use the carriages to fast travel no matter where it is or where it goes the CTD always happened 3 around 3 secs after the load screen started.

Sent from my ONEPLUS A5010 using Tapatalk

If something does't work with racemenu my first guess would be memory problems.

 

In regards to CTD after fast travel - which I assume is not limited to fast travel by carriage only but any fast travel - is most likely due to a invalid or missing mesh. The FAQ entry about CTD points to specific troubleshooting  tips in the readme.


  • 0

#1123 reddvilzz

reddvilzz

    Jarl

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 870 posts

Posted 13 January 2019 - 01:25 AM

If something does't work with racemenu my first guess would be memory problems.

In regards to CTD after fast travel - which I assume is not limited to fast travel by carriage only but any fast travel - is most likely due to a invalid or missing mesh. The FAQ entry about CTD points to specific troubleshooting tips in the readme.

All the other options are working though, but not the body textures / overlay features. Any idea on how to fix it?

Fast travelling using console command doesn't give CTD, only by carriages and it's not after fast travelling but it happens when I hop on to the carriage and then the load screen shows up, 3 seconds later CTD. So it is not even completed yet. I've tested it, the papyrus log doesn't show up anything though regarding the CTD.

Sent from my ONEPLUS A5010 using Tapatalk

Edited by reddvilzz, 13 January 2019 - 01:27 AM.

  • 0

#1124 sheson

sheson

    Dragon King

  • Mod Authors
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 3,785 posts

Posted 13 January 2019 - 03:55 AM

All the other options are working though, but not the body textures / overlay features. Any idea on how to fix it?

Fast travelling using console command doesn't give CTD, only by carriages and it's not after fast travelling but it happens when I hop on to the carriage and then the load screen shows up, 3 seconds later CTD. So it is not even completed yet. I've tested it, the papyrus log doesn't show up anything though regarding the CTD.

Sent from my ONEPLUS A5010 using Tapatalk

DynDOLOD plugins do nothing to racemenu directly.

 

The readme has more suggestions what to do than just checking the papyrus log.

 

However, it should make no difference if the loading was initiated after entering a carriage or after manual fast travel.


Edited by sheson, 13 January 2019 - 05:55 AM.

  • 0

#1125 reddvilzz

reddvilzz

    Jarl

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 870 posts

Posted 13 January 2019 - 09:41 PM

DynDOLOD plugins do nothing to racemenu directly.

The readme has more suggestions what to do than just checking the papyrus log.

However, it should make no difference if the loading was initiated after entering a carriage or after manual fast travel.

Okay I'll try and look for the logs of the created DynDOLOD as per readme.

Sent from my ONEPLUS A5010 using Tapatalk
  • 0



Also tagged with one or more of these keywords: dyndolod, lod, skyrim se, skyrim vr

3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users