Jump to content


Photo

WAR-Enhanced Camera compatibility pack Help


Best Answer ZidanReign , 22 July 2018 - 08:23 PM

you have to create the directory as directed and move the ini file there to be able edit it

Go to the full post


  • Please log in to reply
9 replies to this topic

#1 RandolphCarter

RandolphCarter

    Prisoner

  • Members
  • 7 posts

Posted 21 July 2018 - 11:23 PM

Hi.

Recently upgraded my computer and figured I'd give Fear & Loathing a go again given that all the bells and whistles will actually be able to run on it this time around. Things have been going well up until this point, but I seem to have hit a brick wall with the WAR-Enhanced Camera Compatibility Pack's functionality. It's worth noting that I'm using Mod Orgainzer 2, so that might be effecting things, but when it comes time to install either of the main files I'm seeing none of the following options (per the guide) on my end:
 

Install the Release 2 - 2hand Rifle Reanimations file first.
During installation, expand "Release 2 - 2handrifle animations->Raw Files".
Right click "Data" and select "Set data directory", then click [OK].

Install the Release 3 - 2hand auto reanimations - v2 with animated fingersfile next.
During installation, expanded "Release 3 - 2handauto update v2.0->2handauto v2.0->Data".
Right click "Data" and select "Create Directory", then name it NVSE.
Right click "NVSE" and select "Create Directory", then name it Plugins.
Drag and drop "NVSE_EnhancedCamera.ini" into "Plugins".
Right click "Data" and select "Set data directory", then click [OK].
When asked select [Merge], not [Replace].

 

 

 

Instead, when I try to manually install either mod, I'm getting screen that look like the one provided below. However, it's worth noting that all of the files mentioned on the Nexus appear in the .rar files as they are on my desktop at the moment.

FnL.png

Edited by RandolphCarter, 21 July 2018 - 11:25 PM.

  • 0

#2 ZidanReign

ZidanReign

    Citizen

  • Members
  • Pip
  • 80 posts

Posted 22 July 2018 - 12:11 AM

 

Hi.

Recently upgraded my computer and figured I'd give Fear & Loathing a go again given that all the bells and whistles will actually be able to run on it this time around. Things have been going well up until this point, but I seem to have hit a brick wall with the WAR-Enhanced Camera Compatibility Pack's functionality. It's worth noting that I'm using Mod Orgainzer 2, so that might be effecting things, but when it comes time to install either of the main files I'm seeing none of the following options (per the guide) on my end:
 

Instead, when I try to manually install either mod, I'm getting screen that look like the one provided below. However, it's worth noting that all of the files mentioned on the Nexus appear in the .rar files as they are on my desktop at the moment.

FnL.png

 

That's because MO2 is able to properly pick up some of the folder structures a bit more properly so some mods that had to be set manually previously are able to find the data directory without a problem.

 

Just install in order.


Edited by ZidanReign, 22 July 2018 - 12:12 AM.

  • 1

#3 RandolphCarter

RandolphCarter

    Prisoner

  • Members
  • 7 posts

Posted 22 July 2018 - 10:39 AM

That's because MO2 is able to properly pick up some of the folder structures a bit more properly so some mods that had to be set manually previously are able to find the data directory without a problem.

 

Just install in order.

Thank you.

However, I'm not seeing a way to edit the .ini files that are associated with the mod after installing them. Is it okay to simply proceed with everything else or is there something else I'll have to end up doing?
 


  • 0

#4 ZidanReign

ZidanReign

    Citizen

  • Members
  • Pip
  • 80 posts

Posted 22 July 2018 - 08:23 PM   Best Answer

you have to create the directory as directed and move the ini file there to be able edit it


Edited by ZidanReign, 22 July 2018 - 08:24 PM.

  • 0

#5 DoMiNaNt_HuNtEr

DoMiNaNt_HuNtEr

    Prisoner

  • Members
  • 6 posts

Posted 03 December 2018 - 10:04 PM

Right click "Data" and select "Create Directory", then name it NVSE.
Right click "NVSE" and select "Create Directory", then name it Plugins.
Drag and drop "NVSE_EnhancedCamera.ini" into "Plugins".
Right click "Data" and select "Set data directory", then click [OK].
When asked select [Merge], not [Replace].

The instructions still don't make sense. There is no Data folder, there's the blank <data> which I've right clicked and created new directory names NVSE, and inside that I've created a new directory Plugins, but I can't drag and drop anything into that menu, and there's no data folder to set data directory. All it lets me do is merge. I'm stuck at this point. Any help?

 

@Randolph Carter: Did you figure it out? What happened with you?


  • 0

#6 Greg

Greg

    Dragonborn

  • Super Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 1,890 posts

Posted 03 December 2018 - 10:43 PM

Right click "Data" and select "Create Directory", then name it NVSE.
Right click "NVSE" and select "Create Directory", then name it Plugins.
Drag and drop "NVSE_EnhancedCamera.ini" into "Plugins".
Right click "Data" and select "Set data directory", then click [OK].
When asked select [Merge], not [Replace].

The instructions still don't make sense. There is no Data folder, there's the blank <data> which I've right clicked and created new directory names NVSE, and inside that I've created a new directory Plugins, but I can't drag and drop anything into that menu, and there's no data folder to set data directory. All it lets me do is merge. I'm stuck at this point. Any help?

 

@Randolph Carter: Did you figure it out? What happened with you?

 

You're missing a step from the guide:

During installation, expanded "Release 3 - 2handauto update v2.0->2handauto v2.0->Data".


#7 DoMiNaNt_HuNtEr

DoMiNaNt_HuNtEr

    Prisoner

  • Members
  • 6 posts

Posted 04 December 2018 - 05:06 AM

Expanding "release 3" where? in the MO2 program? I do that every time, and NONE OF THIS shows up. There is no Data folder. There are only "FOMOD" and "MESHES." I'm telling you, there's something wrong with this portion of the guide. Everything before this was a walk in the park. This is simply not directed properly. These instructions sound like they constitute a different program. but for the entirety of this guide, I've been using MO2. Do I gotta run FOMOD thru MO2? I'm telling you this particular entry for the Fear Loathing guide needs updating.


Edited by DoMiNaNt_HuNtEr, 04 December 2018 - 05:07 AM.

  • 0

#8 ZidanReign

ZidanReign

    Citizen

  • Members
  • Pip
  • 80 posts

Posted 04 December 2018 - 10:38 AM

Read what I said again.

 

If the folder layout is wrong something is going on with the file your installing.

 

Look carefully at the screenshot above after setting the directory inside the folder of the Release 3 file.


Edited by ZidanReign, 04 December 2018 - 10:43 AM.

  • 0

#9 DoMiNaNt_HuNtEr

DoMiNaNt_HuNtEr

    Prisoner

  • Members
  • 6 posts

Posted 04 December 2018 - 07:52 PM

The screenshot that Randolph Carter posted looks just like mine. Oh so I have to create a Data folder? Then create the NVSE folder inside of it, then Plugins inside of that, etc? But how do I drag and drop the ini file into it using Mod Manager?


  • 0

#10 ZidanReign

ZidanReign

    Citizen

  • Members
  • Pip
  • 80 posts

Posted 05 December 2018 - 03:34 AM

Just do it in file explorer if the Mod Manager is too confusing.

Install the folder without having the right directories set and open the folder location in File Explorer, then do everything from there.


  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users